I went outside and i took a few picture of random things on the camera. I Held the button down half way and checked to see if there was agreed light. If there was a red + then i had to turn the aperture so that there would be less light. If there was as red - then i had to turn the aperture so that there was more light. The i had to focus the camera and pull the film advanced lever and then check again and take the picture. I came inside and rewinded the film into the canister and then opened the camera. I put the blackout container in a black out bag with the film and a can opener. Then i opened the film in the bag and then i put it on a real in the container. The next day i did the developing process and it was water pre-wash(1 minute), developer(11.5 minutes), stop bath(1 minute), fixer(3 minutes), water pre-wash (1 minute), fixer remover(3 minutes), water wash (5 minutes), then hang and dry. Next day i went into the dark room and put all the film on photo sensitive paper did test strip then shot them all on the number. I picked the best clearest picture and started developing that picture using the enlarger and we used a number 2 filter on 5.6. The i did the chemical process and ended up with the big picture.